Q235 Container Bottom Beam Roll Forming Machine
  • Product Description
  • Application
  • Maintance and the service of the machine
No.
Item
Specification
1
Decoiler
5T Manual decoiler
2
Mill bed material
450 H steel welding
3
Feeding platform type
Side roller type
4
Transmission method
Gearbox drive
5
Side wall thickness
20mm
6
Shaft diameter
95mm diameter with solid shaft
7
Main motor power
2*18.5kw
8
Machine speed
8-10m/min
9
Forming stations
20 stations
10
Shaft material
GCR 15 with heat treatment
11
Cutting blade material
CR 12Mov
12
Pump station power
5.5 kw 
13
Raw material Thickness
2.5-4.0mm
14
Length sizing accuracy
+/- 2mm
15
lacing hole mold
One set

Daily maintenance with meticulous care plays an important part in extension the equipments’ operation time and the quality of rolling plank. Therefore, please do the following things in your daily
1.The hydraulic tank must be filled with 32# or 46# hydraulic oil before using. The amount of oil is subject to the oil mark
2. Add and daub lube often to the outside parts. (Such as driving chain,Scissors, gears, rollers, )
3. Wipe the surface dust of roller often and particularly work outside. If you do not use it for long time ,you should daub
machine and lube in the roller surface and you need clean it when you use next time.
4. If the equipment does not use for long time, you should use plastics cloth or other articles to cover it and notice to avoid
rain and damp, especially electrical controlling box
5. Cutting device should add lube to the places where need lube to the request
6. Usually look into hydraulic station and the oil quantity of deceleration machine, you should add in time when oil quantity
shortage
7. Electrical components should be guaranteed to work in a dry environment, such as damp. Rain should continue to work after drying.
Products
Product Catalog