0-12m/min working speed roof batten roll forming machine
|
Item NO |
Description |
Offered specification |
|
1.1 |
Rolling speed |
0-12m/min(not include cutting time) |
|
1.2 |
Rolling thickness |
0.4 mm to 1.0mm Galvanized coils |
|
1.3 |
Main motor |
5.5 KW |
|
1.4 |
PLC |
Delta Brand |
|
1.5 |
Dimension |
About 5000×435×1000(mm) |
|
1.6 |
Voltage |
220V, 60HZ, 3phase |
|
1.7 |
Roller stations |
About 13 stations |
|
1.8 |
Roller material |
45# high grade steel with quenching |
|
1.9 |
Shaft diameter |
Φ50mm ,material is 45# forge steel |
|
1.10 |
Transmission |
By chain One inch chain |
|
1.11 |
Material of chain |
45# forged steel with frequency quenching |
|
1.12 |
Material of cutting |
Cr12Mov with quench HRC58-62° |
|
1.13 |
Tolerance |
6m+-1.5mm |
Advantages:
1. The control box and the hydraulic station for the cutting are all put under the bedding, when you get the machine, the machine is one unit, no need to assemble and connect the complicate cable of the machine, you only need to connect one main cable, then the machine is working.
2. The touch screen is hang over, it is not under the floor.
3. The accuracy of our machine is -/+0.5-1mm.
4. The roller is solid and electroplated, which will not have rust.
5. The material are all national standard and cutter will not have burr.
6. The board are all milled and polished.
7. The roller is solid and galvanized
8. Our machine is a little heavy than others, because it have more stands
Machine pictures
-
DecolierDouble Heads Decoiler
A type decoiler
Manual Decoiler
Hydraulic Decoiler
-
StructureWall panel
Torri Structure
Cast Iron
-
DriveChain
Gear
Gearbox
Couplings Gearbox
-
CoolingWater cooling
Fan cooling
-
PunchingHydraulic punching
Hydraulic press
Punching press
-
CuttingHydraulic stop cutting
Servo Following Cutting
Stop Saw cutting
Fly saw cutting
-
Out tableManual table
Simple pneumatic table
Automatic stacker
Magnetic stacker
-
OtherCassette
Plastic film
Fleece devce
Pre-cutting
Our display screen is touch screen, not text touch screen.
Sussman roll forming system: We will make the hand wheels at the feeding device to adjust feeding width, and we also make the wheels with the numbers then you know how to adjust right and left sides, also we made the rulers on the bedding, you can adjust the profile height and width according to the rulers.
Screw with numbers is to adjust material thickness easily, also with protecting cap also add laminating film device and felt to make the board flatter and smoother without scratches.
The machine is equipped with a detection switch device, in case of emergency, emergency alarm, stop operation.
CONTACT US
Related Products
