1.Technical parameter
Items |
Specifications |
|
Material of coil |
Material Thickness |
0.5-0.7mm galvanized, G235-350Mpa |
|
Un Coiler |
3 tons manual |
Forming system |
Rolling Speed |
About 10-20 m/min |
|
Roller Stations |
About 19 stations |
|
Roller Material |
45# Steel with quenching 60mm shaft
|
|
Maim Motor Power |
7.5 kw |
|
Hydraulic cutting Power |
3 kw |
Cutting system |
Material Of Cutting |
CR12 with quench treatment |
|
Hardness |
HRC58-62 |
|
Tolerance |
+-1.5mm |
Electrical control system |
Electric Source |
380V, 50HZ,3 phase Also can satisfy Customer’s require |
|
Control System |
PLC with touch screen |
|
Weight |
About 3.5 tons |
|
Way Of Drive |
1 inch single chain |
|
Size of machine |
Length 9500mm* Width 800mm* Height 1500mm |
2.Machine List
3 ton manual de-coiler |
1 set |
Feeding with guide |
1 set |
Hydraulic punching |
1 set |
Main roll forming machine |
1 set |
Hydraulic cutting device |
1 set |
PLC Control box |
1 set |
Hydraulic station |
1 set |
4m out table |
1 set |
Safety cover |
1 set |
3.Technical process
Uncoiling—feeding with guide—Hydraulic punching—Roll forming——Cutting—Products collecting
Our display screen is touch screen, not text touch screen.
Sussman roll forming system: We will make the hand wheels at the feeding device to adjust feeding width, and we also make the wheels with the numbers then you know how to adjust right and left sides, also we made the rulers on the bedding, you can adjust the profile height and width according to the rulers.
Screw with numbers is to adjust material thickness easily, also with protecting cap also add laminating film device and felt to make the board flatter and smoother without scratches.
The machine is equipped with a detection switch device, in case of emergency, emergency alarm, stop operation.