Silo Upright post machine

description1
Zipper closure 1/4 zip athletic pullovers for men. Stretchy, lightweight, fast-drying fabric for superior performance. REGULAR FIT - US standard sizes. An athletic fit that sits close to the body for a wide range of motion, designed for optimal performance and all day comfort. FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them in place during workout
1.Omega Silo Roll Forming Machine

The profile:The thickness of sheet: 1.5-6mm

 

 

 

 

 

 

 

FOB Shanghai Port

10 ton hydraulic Un-coiler with coil car

1 set

 

Feeding and leveling device

1 set

 

Hydraulic punching device

2 sets

 

Cutting and Weld device

1 set

 

Main roll forming machine

1 set

 

Hydraulic press machine 600 tons

1 set

 

Punching moulds for press machine

1 set

 

Servo following Cutting

1 set

 

Control box

1 unit

 

Hydraulic system

1 unit

 

6 meters auto stacker

1 unit

 

Subtotal FOB Shanghai

 

 

 

The production flow of equipment

De-coiling—Feeding&leveling—Cutting&welding——Punching——rollforming——Punching——hydraulic cut to length——Auto stacker

10 ton Hydraulic de-coiler with coil car

    • Single unrolling machine, one side can put material
    • Adopt automatic hydraulic system
    • Coil weight (Max):10000kg
    • Coil dia (Max):1600mm
    • Oil cylinder dia:1200mm  working pressure: 10mpa
    • Coil Width (Max.):500mm
    • Working speed: 10m/min
    • Power: 5KW

2. Feeding & leveling

Main features of the machine:

The leveling roller's mechanical property such as rigidity and roughness concentration of the surface are rising very much after hardening and tempering. It includes pinch roll and leveling roll. The pinch roll can adjust along. The leveling roll uses the whole structure. There are two adjusting point at the front and the end. It can form a certain banked angle to improve the leveling quality. The feeding port of the leveling machine has a pair of guide plain-barrelled roll and two pairs of guide vertical roll. The guide vertical roll can moves centered or moves at the same time. It is adjusted by hand wheel, so it is convenient to centered

1: feeding the sheet to the guide roller (it is adjustable by right and left).

2: feeding roller: diameter is ¢160mm; material is 40CR steel, HRC48-52.

3: Leveling roller: upper is 3 rollers, down is 4 stations(total is 7 stations), material is 40CR steel, HRC48-52.

4: diameter of leveling roller: 180mm

3. Hydraulic Punching
    • Using hydraulic punching
    • Oil cylinder dia:¢220mm
    • Working pressure:18mpa
    • Mould material: Cr12mov quenched 58°-62°
    • Hydraulicstation power:30kw

4. Roll forming machine

5. Hydraulic Punching
    • using hydraulic punching
    • Pressure: 250 tons
    • oil cylinder dia:¢180mm
    • working pressure:30mpa
    • mould material: Cr12mov quenched 58°-62°
    • hydraulicstation power:55kw
    • Punching die set: total 3 sets of bottom punching die 5-3.0mm, 3.5-4.5mand 5-6mm

Servo following Cutting

    • hydraulic non stop Servo following cutting
    • knife material: Cr12mov,quenched 58°-62°
    • oil cylinder dia:250mm
    • working pressure:60mpa
    • working journey: 80mm

6.Control box Siemens control system

1: Full line is controlled by PLC Siemens, touch Screen Siemens, transducer Siemens or ABB control system touch screen operation to achieve the human and PLC interactive. The operator can monitor the setting program (programmable control) and modify the parameter to control the line. Also can check the running status, parameter and error indication etc..

 

2: Operation type: manual /auto two type switch. In manual position: can run the each part of the machine. In auto position: can run the full line. The emergency stop ensures the safe of the equipment and operator.

 

3: Machine side is equipped with the manual operation control panel for convenient worker to operate;

 

4: Entire line surveillance function: to reach surveillance production line movement condition, realizes to various locations production condition surveillance;

 

5: Has the failure detection function: Carries on to the production line signal succession examines, the checkup according to sequence, discovers the mistake, and giving the alarm to stop the machine

7. 3 Meters Pneumatic Auto slide stable

 

8. Spare parts list

CONTACT US