It is a structural profile type SSR (standing sean roof) manufactured on a roll former for sheet kr-18, You keyed joints at the ends. The fastening system 18 is kr-based hidden clips, reducing the risk of possible leaks since no drilling required for installation lamin. 

Disponible en calibres 22 al 26
*Recomendado en Calibre 24 para Techos Engargolados.

KR-18 is a SSR (Standing Seam Roof) type roof, which means that it is corrugated and seam-mounted on site. It has a hidden fixing system based on clips, reducing the risk of possible leaks since it is not necessary to drill holes in the roof for its installation.

KR-18 Seam Roof has no limitations in its length since it is manufactured in a single piece from the gutter to the ridge. It also allows the installation of insulating materials and can be installed on low-slope roofs up to 2%. KR-18 is perfect for use on industrial roofs, composite or insulated roofs, industrial buildings, re-roofs, among others.

ADVANTAGES OF USING KR-18
It is not necessary to drill holes in the roof for installation
It allows the installation of insulating materials such as fiberglass, foamular, combining impermeability with energy savings.
Lengths according to your needs.

What are the kinds of standing seam profiles?

Standing seam roof panels have concealed fastenings to the structure within the side-seams. The side-seams are vertically-oriented profiles (hence the term “standing seam”. These panels are often abbreviated as SSR (Standing Seam Roof), or SSMR (Standing Seam Metal Roof). This panel type has adjacent panel edges bent up to 90° from the flat and then adjoined with the adjacent panel edge to form the joint. 

The joint may be done with a male-female interface, or twin male edges enveloped by a female cap component. Some of these seam styles may be just snap-fitted to interlock while others may be folded together with special electric seamer tools as they are installed. In the case of a folded seam, it may be “single-folded” to 180º resembling an upside-down “L”.  In other cases, , it may be “double-folded” forming a 360° joint. 

There are also less common standing seam geometries that have unique shapes of their own.

Examples are shown below.

(1) Original Double-Folded

(2) Horizontal - Single-Folded

(3) Bulb - ZipRib

(4) Trapezoidal-Rib

(5) "Tee" Seam

(6) Applied Cap

(7) Snap Lock

Sussman Machinery can customized the machine according to your request, we have two model for KR18 standing seam machine, one is with wheel, here is the photo, this machine can produce in your warehouse or your construction site.

Other one is without wheel, you can take it to produce in the roof